svzhuk писал(а):E808
0000
Fixing dri ve circuit failure
- The heater does not turn on.
- A fixing dri ve motor failure was
detected.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the fixing dri ve motor.
- Replace the DC controller PCB.
- Replace the power supply PCB.
E001
0001
Abnormally high temperature (detected by sub thermistor)
The sub thermistor detected an
abnormally high temperature (295 deg
C) during temperature control.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the DC controller PCB
nekiж писал(а):а что, наружный осмотр не выявил порванной термоплёнки?..)))
Вернуться в Принтеры, МФУ, копиры формата A3
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 39