T.E.S.T.C.O.P.Y. • Просмотр темы - Epson SC-S30610

Epson SC-S30610  Вопрос решен

Обмен опытом, решение проблем.

Модераторы: KOT, Женька 116

Прилепить пост

Сообщение 3cxmoskva » Вс окт 14, 2018 9:34 am

Problem in printing plotter.
After cleaning pict 2 in atach.
Print head, ink dampers or pump ?
Вложения
Аватар пользователя
3cxmoskva   
Собрал картридж правильно
  • Не в сети

Прилепить пост

Сообщение oldman_lbt » Вс окт 14, 2018 10:41 am

judging by the photo - the print head is clogged, cleaning did not help completely - clean more
Аватар пользователя
oldman_lbt   
ой, всё...

Прилепить пост

Сообщение 3cxmoskva » Вс окт 14, 2018 12:31 pm

Oldman, do you have any nozzle check picture with pump-cap-wiper problems ?

For example full missing one color in nozzle check is problem,damper,pump,clogged PHead ?

How will I recognize pump problems ?
Аватар пользователя
3cxmoskva   
Собрал картридж правильно
  • Не в сети

  Вопрос решен

Прилепить пост

Сообщение oldman_lbt » Вс окт 14, 2018 2:28 pm

except for manual testing of the pump - no way. almost any component giving such a failure can be to blame. there are no special diagnostic tools. run a couple of times to clean the print head, then print out 4 large areas filled in (4 colors) per sheet - if there was ink, then the strips are gone - this only means that the ink is not received in time. there may be a fault in the ink pump.

my english - google translate
Аватар пользователя
oldman_lbt   
ой, всё...

Прилепить пост

Сообщение 3cxmoskva » Пт окт 19, 2018 8:53 am

Oldman,I dont understand your past sentences for testing pump " if there was ink...


Example: epson wf-5620, print head or pump,picture in atach
Вложения
Последний раз редактировалось 3cxmoskva Пт окт 19, 2018 9:53 am, всего редактировалось 1 раз.
Аватар пользователя
3cxmoskva   
Собрал картридж правильно
  • Не в сети

Прилепить пост

Сообщение oldman_lbt » Пт окт 19, 2018 9:38 am

its a bad google translate.

if the printer prints well first, then the gaps go, then there is a problem with the ink supply to the print head
(google translate)
Аватар пользователя
oldman_lbt   
ой, всё...

Прилепить пост

Сообщение aresson » Пт окт 19, 2018 9:42 am

he meant "if the inks will be on the paper" or something like that :hi_hi_hi:
Аватар пользователя
aresson   
Чернокнижник

Прилепить пост

Сообщение 3cxmoskva » Пт окт 19, 2018 10:08 am

On wf-5620 cleaninig,cleaninig..not good nozzle check black ink on picture above. Print head or pump problem?
Аватар пользователя
3cxmoskva   
Собрал картридж правильно
  • Не в сети

Прилепить пост

Сообщение oldman_lbt » Пт окт 19, 2018 11:14 am

in order to understand who is guilty, you must first try to flush the print head - drip the washing liquid from above onto the nozzle for the black cartridge. if the liquid goes bad - flush the head. if the liquid goes well - look at the ink pumping system and the place where the head is parked.
and also - if you do not really understand what to do, look for information on the Internet in your own language - this is better than my explanation curves. Well, remember - there is always a risk in such matters of spoiling the printer - be careful.
Аватар пользователя
oldman_lbt   
ой, всё...

Прилепить пост

Сообщение aresson » Пт окт 19, 2018 1:47 pm

3cxmoskva писал(а):Print head or pump problem?

I think, the printhead is the cause of your problem. I saw a pump problem very-very rare
Аватар пользователя
aresson   
Чернокнижник


Вернуться в Плоттеры

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 11

вверх
вниз
x

#{title}

#{text}