T.E.S.T.C.O.P.Y. • Просмотр темы - stylus pro 4900 pump bad

stylus pro 4900 pump bad

Обмен опытом, решение проблем.

Модераторы: KOT, Женька 116

Прилепить пост

Сообщение 3cxmoskva » Ср окт 21, 2020 10:09 pm

blank printed page,I doubt on pump assy because gears inside pump has bad sound. My question is,after replace pump which command is best for fill ink in print head ,cleaninig. CL0,CL1. ,ink charge...?

I got error 1125 and solve it with new i/s pump. Thx
Последний раз редактировалось 3cxmoskva Сб фев 13, 2021 10:41 am, всего редактировалось 1 раз.
Аватар пользователя
3cxmoskva   
Собрал картридж правильно
  • Не в сети

Прилепить пост

Сообщение Rexvil » Чт окт 22, 2020 8:42 am

You must use "Ink Charge" if you have used "Ink Eject" before.
According to the service manual: "Ink consumption is reduced by executing CL2 instead of Initial Charge after replacing the Printhead .. ".
If you have not removed ink from the system, you can use one of the cleaning modes
Вложения
cleaning
inkCharge
<сохрани себя>*<save yourself>
Аватар пользователя
Rexvil   
Заправщик


Вернуться в Плоттеры

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 14

вверх
вниз
x

#{title}

#{text}