T.E.S.T.C.O.P.Y. • Просмотр темы - Hp T520

Hp T520

Обмен опытом, решение проблем.

Модераторы: KOT, Женька 116

Прилепить пост

Сообщение Sergey Sukharenko » Пт июн 04, 2021 2:04 pm

Все день добрый.
Такая проблема....плоттер начинает печать, от правого края, на 3мм за пределами листа. Это только при работе с рулоном. Я уже заменил ленту позиционирования.
Вложения
Последний раз редактировалось Sergey Sukharenko Пт июн 04, 2021 3:30 pm, всего редактировалось 1 раз.
Аватар пользователя
Sergey Sukharenko   
Осматривается
  • Не в сети

Прилепить пост

Сообщение Rexvil » Пт июн 04, 2021 2:43 pm

Скрытый текст +
The image is clipped
Clipping normally indicates a discrepancy between the actual printable area on the loaded paper and
the printable area as understood by your software.
Check the actual printable area for the paper size you have loaded.
printable area = paper size - margins
Check what your software understands to be the printable area (which it may call "printing area"
or "imageable area"). For example, some software applications assume standard printable areas
that are larger than those used in this printer.
If you have defined a custom page size with very narrow margins, the printer may impose its own
minimal margins, clipping your image slightly. You may want to consider using a larger paper
size.
If your image contains its own margins, you may be able to print it successfully by using the Clip
Contents by Margins option.
If you are trying to print a very long image on a roll, check that your software is capable of
printing an image of that size.
You may have asked to rotate the page from portraito landscape on a paper size that is not
wide enough.
If necessary, reduce the size of the image or document in your software application, so it fits
between the margins.
There is another possible explanation for a clipped image. Some applications, such as Adobe
Photoshop, Adobe Illustrator and CorelDRAW, use an internal 16-bit coordinate system which means
that they cannot handle an image of more than 32,768 pixels.
NOTE: An image 32,768 pixels long would print at a length of 1.39 m (54.61 in) if you select Best
or Quality in the driver, 2.78 m (109.23 in) if you select Fast, Normal or Speed in the driver.
If you try to print an image larger than this from these applications, the bottom of the image may be
clipped. To print the whole image, try these suggestions:
The driver dialog includes an option called Max. application resolution, which enables you
to print successfully in this situation. You will not normally need to change the default selting,
which is Auto. However, you can find the option in the Advanced tab, under Document
Options > Printer Features.
Save the file in another format, such as TIFF or EPS, and open it with another application.
Use a RIP to print the file.
<сохрани себя>*<save yourself>
Аватар пользователя
Rexvil   
Заправщик

Прилепить пост

Сообщение Sergey Sukharenko » Пт июн 04, 2021 3:20 pm

Он так печатает даже внутренние тест листы. Для примера.....при колибровки головок он должен отступить от правого края где то 5-7 мм, а он не отступает а печатает прямо в край плюс 3 мм за край.
Аватар пользователя
Sergey Sukharenko   
Осматривается
  • Не в сети


Вернуться в Плоттеры

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 18

вверх
вниз
x

#{title}

#{text}