


Вот выдержка из мануала:
4.6.1 PCU
1. Open the right door.
- The PCU may become stuck if you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder.
- Clean all spilled toner off the toner bottle area and the inside of the front door.
4. Pull out the PCU ( x 1).
5. When having installed a new PCU,remove the Styrofoam and tags ( p.2-5 "Copier" in
the chapter "Installation").
Initialization:
After you turn on the main power switch, the copier automatically initializes the new PCU. When
the copier is executing initialization, it is important that you:
- Do not turn off the main power switch.
- Do not open or remove exterior covers.
Это если нет ошибки об окончании тонера.