Модераторы: avalon, Konstantin_stv
4000 Polygon motor (laser scanner unit) error - The polygon motor ready input is not given for 6 s during the polygon motor is ON.
-- Defective harness between polygon motor and control PWB (YC10), or improper connector insertion.
Reinsert the connector. Also check for conti-nuity within the connector harness. If none, remedy or replace the harness.
-- Defective laser scanner unit.
Replace the laser scanner unit.
-- Defective control PWB.
Replace the control PWB.
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 38