поехали с поста номер 2:inf писал(а):1. DEBUG подключай
2. смотри что тама
2.1. оригинал попробовать через дебаг
1.подключился
2. Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
New kernel was found...
CHKSUM
{
check sum start address : 41000000, count : 001B0000
check sum : 0000A5A5
} /* Checksum End
Checksum OK!!
Kernel Data Read End
Find Compressed Kernel
Kernel UnZip Done!!
jump to 0x40080000
ramsize= 406BFFFF, gsbsize = 40501204, FreeMemPtr = 40500548, FreeMemStart = 40
500548
<<< Reelase Mode >>>
<<<LogMsg_PrintOff>>>
Model Code : SCX3200
Main Kernel F/W Version : V3.00.01.08
Main Kernel F/W Date : OCT-18-2010
Check PowerOn Mode PBA Port
( GPIO3In - 0x2daff, GPIOIn - 0xef )DRAM:>
################### Normal Mode Start##########################
3.пробую оригинальную прошивку:
Drv "design ware core" USB download<HS><HS><EPB_RX 0x00000200>
Image includes PJL(0000001B) -> Waste 92 bytes
[[4194424 Bytes received]] - Complete Downloading
} /* Download End */
verify_Image : 0x40100000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
model : 0x05000041
flash type : 0x00020002
image type : 0x00000000
temp_buf : $KER
SIG : $KER
FlashCheckSum
{
check sum start address : 4010001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Not found new kernel!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again
