T.E.S.T.C.O.P.Y.

Добавлено: **Ср мар 30, 2011 3:08 pm**

Hi :). Got ML 1640 yesterday, after 5 days from FW upgrade (FIX_ML1640_V1010083.fls), all working ok when I gave it to the customer, now red and orange blinking simultaneously. Does anyone have any idea? Printer was not connected to internet enabled computer so FW auto update is not possible to have happened.
Thanks in advance

Добавлено: **Ср мар 30, 2011 3:15 pm**

Try to download from the forced download this firmware here.

Добавлено: **Ср мар 30, 2011 3:31 pm**

I already unsolder the chip from board but have no dump file .bin :)

Добавлено: **Ср мар 30, 2011 3:51 pm**

No need to shoot flash the chip via USB

Добавлено: **Ср мар 30, 2011 3:54 pm**

Printer is not seen when attached through usb on computer like its dead (m board).

Добавлено: **Ср мар 30, 2011 3:55 pm**

You need to flash the printer firmware first, which I gave you a forced download, and then stitching FIX. I met a couple of times with this problem))

Добавлено спустя 2 минуты 40 секунд:
Turn on the printer while holding the button "stop" must then be determined.

Добавлено: **Ср мар 30, 2011 4:01 pm**

ok :)

Добавлено: **Ср мар 30, 2011 4:03 pm**

Good luck)))

Добавлено: **Ср мар 30, 2011 5:11 pm**

forced download went ok on second try ;))

Добавлено: **Ср мар 30, 2011 6:02 pm**

offtop - send me an animated flag of your country :)

Добавлено: **Чт мар 31, 2011 9:02 am**

paratrooper писал(а):forced download went ok on second try ;))

Do you all get?

T.E.S.T.C.O.P.Y.

Ml 1640 red and orange blinking