Доброго времени суток. Аппарат Canon imagerunner 2545i , вышла из строя плата питания. По мануалу номер FM3-9258-000. Заказал, пришла, поехал ставить, а они отличаются. На штатной - разъем под выключатель, на заказанной выключатель на самой плате + отсутствует один из разъемов. Пробую ставить, аппарат запускается, но встал в ошибку E000750. В мануале такую ошибку не нашел, в гугле по этой ошибке обнаружил вот такой ответ , но на аппарат 2520.
"Cause of the error code is a version mismatch with the bootROM file and the bootable/language file
Re-launch the firmware flash and follow this order of flashing machine.
Flash BOOT
Flash SYSTEM
Flash Language
Cycle power and let machine boot normally."
Прошивок на аппарат не нашел. Помогите решить проблему.
"Cause of the error code is a version mismatch with the bootROM file and the bootable/language file
Re-launch the firmware flash and follow this order of flashing machine.
Flash BOOT
Flash SYSTEM
Flash Language
Cycle power and let machine boot normally."
Прошивок на аппарат не нашел. Помогите решить проблему.