ну вот уже что-то.
Code
M2-1110
Display
Jam inside machine
Description
A paper jam was detected at the feed sensor.
Remedy
1) Remove the jammed paper. (Refer to 4.1.3) If the error persists, check the followings. 2) Check if the feed sensor connector is connected properly. 3) Check if the Regi roller is contaminated or worn out. If yes, replace it. 4) Check if there is any obstacles or contamination in the paper path. If yes, clean or remove it.
теперь курим мануал на предмет нахождения этого фид сенсора, снимаем его, чистим, ставим взад и наслаждаемся
Code
M2-1110
Display
Jam inside machine
Description
A paper jam was detected at the feed sensor.
Remedy
1) Remove the jammed paper. (Refer to 4.1.3) If the error persists, check the followings. 2) Check if the feed sensor connector is connected properly. 3) Check if the Regi roller is contaminated or worn out. If yes, replace it. 4) Check if there is any obstacles or contamination in the paper path. If yes, clean or remove it.
теперь курим мануал на предмет нахождения этого фид сенсора, снимаем его, чистим, ставим взад и наслаждаемся