подскажите решение?
Boot : B0.17 05-11-2013
DRAM : 256 MB
Press any key to execute Monitor Program within 1 sec...
Kernel Data Read Start From Serial Flash
FlashCheckSum
check sum start address : FEE40000, count : 00700000
check sum : 0000DFFD
} /* Checksum End
Upgrade Flash ROM Image
===============================
Start flash_writer
===============================
Verify Image : 0x03000000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00000000
Model : 0x00000000
Flash Type : 0x00000000
Image Type : 0x00000000
temp_buf :
SIG : $IMG
Can not find signature
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
---------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
---------------------
Download Image from PC
{
Ready to download from Parallel/Usb/Serial (0x03000000)
---------------------
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]
---------------------
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 80 bytes
[[23855208 Bytes received]] - Complete Downloading
} /* Download End */
Verify Image : 0x03000000
i_header->pul_start_addr : 0xFE940000
i_header->ul_count : 0x016C0000
Model : 0x05000045
Flash Type : 0x000E0002
Image Type : 0x00000000
temp_buf : $IMG
SIG : $IMG
FlashCheckSum
check sum start address : 03000018, count : 016C0000
check sum : 0000A5A5
} /* Checksum End
Source Checksum is valid
Boot image!!
Decompress ..................................................................................................................................................................................................................................................................................... Done
Decompress .........................................................................................
[ZLIB ERROR]The compressed data are corrupted or incomplete!!!
Compression of current image is crashed!!!!
Downloaded Image is not Valid
Reset Target and Run Flash Writing Program Again